Submersible Pumpsets – 8″/200mm – T68 Series, Mixed Flow, Borewell 7.5 to 20 HP (3 Phase)

PERFORMANCE
CHART – 8" (200mm) BOREWELL SUBMERSIBLE PUMPSETS (T68 SERIES)
Sr.
No.

Model No.
Type Motor
HP (kW) & (Max. Amp. @ H)
Pump
Stage
Outlet 12.0 13.0 14.0 15.0 17.5 19.0 21.0 22.0 23.5 25.0 26.0 27.5 29.0 31.0 35.0 38.0 40.0 lps
720 780 840 900 1050 1140 1260 1300 1410 1500 1560 1650 1740 1860 2100 2280 2400 lpm
1 T68-72 MF40, DOL 7.5
(5.5) (13.0)
2 4" 33 32 30H 28 25 22 H
e
a
d

I
n

M
e
t
r
e
s

2 T68-102 MF50,
SD
10 (7.5)
(17.0)
2 4" 35 34 32 30H 28 26 25
3 T68-122 MF60,
SD
12.5
(9.3) (21.0)
2 4" 36 35 33 31H 29 27 25 23
4 T68-152 MF70,
SD
15
(11.0) (25.5)
2 4" 36 35 33 32H 30 30 27 24
5 T68-153 MF50,
SD
15
(11.0) (25.5)
3 4" 47 45 42H 40 37 35 33 30
6 T68-202 MF100,
SD
20
(15.0) (34.0)
2 4" 36 35 34 33 30H 27 25
7 T68-203 MF70,
SD
20
(15.0) (34.0)
3 4" 48 47 46 44H 42 40 37 34 32
 

Important Note : Never Test
Pumpset In Dry condition. Pure Water Must completely Be Filled In Motor &
Casing Of Pump Before Testing, Testing Period Must Not Exceed 15 Seconds. Even
For Testing of Motor Only, Water Must Be Filled In It Before Testing. During
Testing Period, Water Must Continuously Be Poured On Oil Seal Of Motor. To Check
Alignment Of Complete Pumpset, Move Shaft Assembly By A Screw Driver
Upward-Downward. The Shaft Assembly Will Lift 1 to 2mm When Alignment Is Proper.
All
Precautionary Measures As Specified In Given Manual, Must Be Adhered Carefully.

T68 Series – Submersible
Pumpsets Are Suitable Fore Borewell of Minimum 8" (200mm) or Bigger Size.
Maximum Outer Diameter of Pumpsets is 182mm. The Pumpsets Comprise Heavy Duty
Motor of 6" (150mm) & Pump of 8" (200mm).

All Above Models Are 3-Phase,
350/440 Volts, 2820/2880 RPM, 50 Hz & 2 Poles.

7.5 HP Submersible Pumpsets
With SD =
) (Delta Connection) (Double Cable) Can Also Be Made Available.

  • MF = Mix Flow Pump
  • DOL = 8
    (Star Connection) (Single
    Cable)
  • SD = ) (Delta Connection) (Double
    Cable)
  • H = Duty Point Head